ENGINEER/SCIENTIST
Duties You will perform life-cycle engineering and logistics services for conventional weapon systems, associated components and other energetics-containing devices.
You will administer and manage engineering, acquisition and logistical support of 2800
unique CAD/PADs for DoD, FMS and other agencies.
CAD/PAD is a full life cycle program.
You will serve as the premier center for energetics technology innovation.
You will take emerging concepts and applies novel design techniques to develop and support energetic components.
You will perform Systems Safety functions for conventional weapon systems, associated components, manned and unmanned vehicles/platforms integrated with energetics and other energetics-containing devices.
RequirementsConditions of Employment Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check.
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.
gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites.
You must be able to travel on military and commercial aircraft for extended periods of time.
Males born after 12-31-59 must be registered for Selective Service.
Per the preliminary nationwide injunction on E.
O.
14043, COVID-19 vaccinations will not be implemented or enforced.
For more information on vaccine status and workplace safety protocol requirements see Additional Information below.
QualificationsIn addition to the basic education requirements, your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower pay band ND-03 (GS-09/11 equivalent) grade level in the Federal service or equivalent experience in the private or public sector.
Specialized experience must demonstrate the following:
as a Professional Engineer performing state of the art engineering and scientific work.
Additional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social).
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 0801/0830/0850/0854/0861/0893 series:
Successful completion of a professional engineering degree.
To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
ORCurrent registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U.
S.
Office of Personnel Management.
For more information, please visit:
http:
//www.
nspe.
org/Licensure/ HowtoGetLicensed/index.
html.
ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).
ORSuccessful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions.
OR Degree:
in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics.
At least 3 of the 24 semester hours must have been in calculus.
For 1550 series:
Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science.
At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.
All academic degrees and course work must be from accredited or pre-accredited institutions.
Additional informationThe Systems Engineering Department (E) is looking for experience engineers in all of their divisions.
We are the principal agent for maintaining the DoD's energetic components and ordnance systems to meet fleet needs and missions.
E1 Energetic Systems Division- Life-cycle engineering and logistics services for conventional weapon systems, associated components and other energetics-containing devices.
E2 CAD/PAD Administer and manage engineering, acquisition and logistical support of 2800
unique CAD/PADs for DoD, FMS and other agencies.
CAD/PAD is a full life cycle program.
E3 Energetics Technology Division - Serves as the premier center for energetics technology innovation.
Takes emerging concepts and applies novel design techniques to develop and support energetic components.
E4 System Safety Division- Performs Systems Safety functions for conventional weapon systems, associated components, manned and unmanned vehicles/platforms integrated with energetics and other energetics-containing devices.
COVID VACCINATION INFORMATION:
To comply with the recent preliminary nationwide injunction on Executive Order 14043, Requiring Coronavirus Disease 2019 Vaccination for Federal Employees, the Department of the Navy is not taking any action to implement or enforce the COVID-19 vaccination requirement.
New hires will need to provide their vaccination status as well as comply with workplace safety protocols related to masking, physical distancing, testing, travel, and quarantine.
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.
Policy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf.
Veteran's preference does not apply when selecting individuals under this specific hiring authority.
However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
This position is eligible for part time, substantial or ad-hoc telework at the discretion of management.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
You will administer and manage engineering, acquisition and logistical support of 2800
unique CAD/PADs for DoD, FMS and other agencies.
CAD/PAD is a full life cycle program.
You will serve as the premier center for energetics technology innovation.
You will take emerging concepts and applies novel design techniques to develop and support energetic components.
You will perform Systems Safety functions for conventional weapon systems, associated components, manned and unmanned vehicles/platforms integrated with energetics and other energetics-containing devices.
RequirementsConditions of Employment Must be a US Citizen.
Must be determined suitable for federal employment.
Must participate in the direct deposit pay program.
New employees to the Department of the Navy will be required to successfully pass the E-Verify employment verification check.
To learn more about E-Verify, including your rights and responsibilities, visit e-verify.
gov Within the Department of Defense (DoD), the appointment of retired military members within 180 days immediately following retirement date to a civilian position is subject to the provisions of 5 United States Code 3326.
You will be required to obtain and maintain an interim and/or final security clearance prior to entrance on duty.
Failure to obtain and maintain the required level of clearance may result in the withdrawal of a job offer or removal.
This position may require travel from normal duty station to CONUS and OCONUS and may include remote or isolated sites.
You must be able to travel on military and commercial aircraft for extended periods of time.
Males born after 12-31-59 must be registered for Selective Service.
Per the preliminary nationwide injunction on E.
O.
14043, COVID-19 vaccinations will not be implemented or enforced.
For more information on vaccine status and workplace safety protocol requirements see Additional Information below.
QualificationsIn addition to the basic education requirements, your resume must demonstrate at least one year of specialized experience at or equivalent to the next lower pay band ND-03 (GS-09/11 equivalent) grade level in the Federal service or equivalent experience in the private or public sector.
Specialized experience must demonstrate the following:
as a Professional Engineer performing state of the art engineering and scientific work.
Additional qualification information can be found from the following Office of Personnel Management website:
https:
//www.
opm.
gov/policy-data-oversight/classification-qualifications/general-schedule-qualification-standards/#url=List-by-Occupational-Series Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.
g.
, professional, philanthropic, religious, spiritual, community, student, social).
Volunteer work helps build critical competencies, knowledge, and skills and can provide valuable training and experience that translates directly to paid employment.
EducationApplicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual:
For 0801/0830/0850/0854/0861/0893 series:
Successful completion of a professional engineering degree.
To be acceptable, the program must:
(1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics:
(a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.
Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position.
ORCurrent registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.
Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.
g.
, State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at:
http:
//www.
nspe.
orgOREvidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U.
S.
Office of Personnel Management.
For more information, please visit:
http:
//www.
nspe.
org/Licensure/ HowtoGetLicensed/index.
html.
ORSuccessful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).
The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above).
ORSuccessful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.
g.
, engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.
Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.
g.
, in interdisciplinary positions.
OR Degree:
in operations research; or at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics.
At least 3 of the 24 semester hours must have been in calculus.
For 1550 series:
Bachelor's degree in computer science or bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science.
At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.
All academic degrees and course work must be from accredited or pre-accredited institutions.
Additional informationThe Systems Engineering Department (E) is looking for experience engineers in all of their divisions.
We are the principal agent for maintaining the DoD's energetic components and ordnance systems to meet fleet needs and missions.
E1 Energetic Systems Division- Life-cycle engineering and logistics services for conventional weapon systems, associated components and other energetics-containing devices.
E2 CAD/PAD Administer and manage engineering, acquisition and logistical support of 2800
unique CAD/PADs for DoD, FMS and other agencies.
CAD/PAD is a full life cycle program.
E3 Energetics Technology Division - Serves as the premier center for energetics technology innovation.
Takes emerging concepts and applies novel design techniques to develop and support energetic components.
E4 System Safety Division- Performs Systems Safety functions for conventional weapon systems, associated components, manned and unmanned vehicles/platforms integrated with energetics and other energetics-containing devices.
COVID VACCINATION INFORMATION:
To comply with the recent preliminary nationwide injunction on Executive Order 14043, Requiring Coronavirus Disease 2019 Vaccination for Federal Employees, the Department of the Navy is not taking any action to implement or enforce the COVID-19 vaccination requirement.
New hires will need to provide their vaccination status as well as comply with workplace safety protocols related to masking, physical distancing, testing, travel, and quarantine.
This position is covered by the Department of Defense Priority Placement Program.
Several vacancies may be filled.
A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.
Federal annuitant information:
The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.
Policy information may be found at:
http:
//www.
secnav.
navy.
mil/donhr/Documents/CivilianJobs/FedCivAnnuitants.
pdf.
Veteran's preference does not apply when selecting individuals under this specific hiring authority.
However, if you claim veteran's preference, you will be required to submit supporting documentation with your application as described in the Required Documents section below.
This position is eligible for part time, substantial or ad-hoc telework at the discretion of management.
.
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
